Silicone keypads in the production of common problems

  News     |      2018-08-29 19:17

Silicone keypads products can be seen everywhere in our lives, but you really understand the complexity of the structure of the silicone keypads, in our silicone keypads factory, of course, in production will inevitably encounter all kinds of problems, common problems, causes and solutions How was it?
 

silicone keypads
 

The first question: Silicone keypads products appear irregular bubbles, bubbles appear at the bottom of the gel or the occurrence of irregular conductive black particles fall off.

 

Reason: vulcanizing agent caused by uneven mixing.

 

Workaround: Re-mix.

 

The second question: the bubble at the sticky hands and looks like raw rubber, the overall product keypads feel soft.

 

Reason: low temperature caused.

 

Solution: improve the temperature to solve.

 

The third question: the silicone keypads on the bubble was white bubbles, torn after the inside was hollow.

 

Reason: High temperature caused.

 

Solution: Reduce the temperature to solve.

 

The fourth question: the bubble at the sticky hand, while the conductive black particles off, the load is low.

 

Reasons: insufficient curing time.

 

Solution: appropriate curing time.

 

The fifth question: the silicone keypads products out of the mold after the surface of white bubbles or white spots, hand pinch or as time goes by the disappearance of a part.

 

Reason: lack of breath.

 

Solution: increase the breathable itinerary or the number of times.

 

The above is the silicone keypads in the production process will be some common problems, if you want to customize the silicone keypads products, it is better to find professional button custom manufacturers, Fashion Silicone Products (Shenzhen) Co., Ltd.