After the purchase of a new silicone products, inexplicable problems that led us to consumers very difficult to get the answer, so do not often understand the structure of the silicone friends can still be found in the silicone material you want the problem reason, the silicone products in the production process which will appear on a variety of process problems, but the process problems can be resolved from the silicone products manufacturers, and raw materials which arise from the raw material suppliers in the production of raw materials to find the problem, so small For the consumer friends to find out the use of silicone products in the course of some bad reasons.
1, silicone products appear to take the phenomenon of oil: sometimes in some mobile phone protective cover, silicone bracelet, daily necessities of raw materials, real carrier of a relatively comprehensive product which will appear to make oil products so that the product feel very sticky, this is because the raw materials into the A mixture of silicone oil and white mineral oil leads to a conflict with white carbon. This product is generally in order to make the product better toughness, more soft and added a chemical agent.
2, silicone products appear yellow: yellow phenomenon is the essence of ordinary silicone products, the general product after use for too long after the changes in the environment will appear yellow phenomenon, but from the addition of anti-yellow agent to achieve the phenomenon of the same yellow or The use of food grade silica gel raw materials and gas phase silica gel raw materials, high transparency and high tensile strength silicone material body is not yellowing phenomenon. So you buy the product is ordinary silica gel and did not add anti-yellow agent led to yellowing the product.
3, feel the product of the tension is too bad: the product is to buy the product pull the intensity is poor, the rebound is small or even pull this phenomenon can occur from the silicone products manufacturers to find the reasons can also be found from the reasons for raw materials, In the raw materials which suppliers to add too much amino-modified silicone oil is to add acidic clay as a catalyst so to improve the viscosity of the silicone raw materials lead to different hardness of the raw materials, tear resistance and tensile properties caused by reduced product life.
4, why silicone products are not resistant to high corrosion chemical substances: silicone can be high temperature of about 200 degrees can not be resistant to high corrosion products, what is the reason, in fact, silicone oil is one of the main reasons, silicone oil can be mixed with the vulcanization of different ingredients The catalyst reduces its viscosity, you can also use alkaline substances to increase viscosity, so in the silicone material as little as possible to add silicone oil can avoid conflict with high corrosion chemicals.
